2 Pole New Generation Surge Protector


  • System: Single-phase
  • Operating Voltage V(in): 220V
  • Operating Frequency: 50/60 Hz
  • Activation Voltage: 275 V
  • IEC Category: Class I+II+III
  • Nominal Voltage UN: 230 V AC (230V AC – 275V AC)
  • Arrester Nominal Voltage UC (L-N): 275 V AC , UC (L-PE): 275 V AC
  • UT (TOV-proof): 15kV, 20kA AC (8/20 µs) (L-N, L-PE) NO GROUND REQUIRED
  • Nominal Frequency Fn: 50 Hz – 60 Hz
  • Nominal Load Current IL: 1000 A (4×2.5mm²)
  • Ground Conductor Current IPE: 1 µA (Ground current IPE)
  • Standby Power Consumption PC: 1.98 mW
  • Maximum Discharge Current Imax (L-N): No Discharge, (L-PE): 20kA, ≤ 10ns
  • Nominal Discharge Current In (L-N), (L-PE): No Discharge, ≤ 10ns
  • Impulse Operating Voltage at 15kV for 10 ns (L-N): 275 V
  • Response Time (L-L), (L-N), (L-PE): ≤ 10ns
  • Maximum Fuse Required for Branch and K-Type: 1000 A (gL/gG)
  • IP Short Circuit Resistance with Maximum Fuse (effective): 1000 kA
  • Number of Poles: 2 (Phase + Neutral)
  • Ground Connection: Available
  • Input Connection: Screw Terminals
  • Output Connection: None
  • Screw Thread: M5, Torque: 4.5Nm
  • Multi-strand and Single-strand Conductor Section: 2.5 mm², 4 mm²
  • Standards/Regulations: IEC 61643-11 2011, IEC 61643-11 2012
  • Protection Class: IP20
  • Enclosure Material: White ABS, UL’94 V-0 Flame Retardant
  • Standards for Clearance and Creepage Distances: DIN VDE 0110-1, IEC 60664-1
  • Overvoltage Protection Fault Message: 1 LED
  • Movement Direction: 3L – N – PE
  • Mounting Type, Design: 35mm DIN Rail, Rail Module
  • Ambient Temperature: -50 °C, +80 °C
  • Dimensions: 50 x 75 x 60mm

4 Pole New Generation Surge Protector


  • System: Three-phase
  • Operating Voltage V(in): 380V
  • Operating Frequency: 50/60 Hz
  • Activation Voltage: 420 V
  • IEC Category: Class I+II+III
  • Nominal Voltage UN: 230 V AC (230/400 V AC – 275/420 V AC), 420 V AC (L-L)
  • Arrester Nominal Voltage UC (L-N): 275 V AC, UC (L-PE): 275 V AC
  • UT (TOV-proof) 15kV, 20kA AC (8/20 µs)(L-L, L-N, L-PE) NO GROUNDING REQUIRED
  • Nominal Frequency Fn: 50 Hz – 60 Hz
  • Nominal Load Current IL: 1000 A (4×2.5mm2)
  • Ground Conductor Current IPE: 1 µA (ground current IPE)
  • Standby Power Consumption PC: 1.98 mW
  • Maximum Discharge Current Imax (L-N): No discharge, (L-PE): 60kA, ≤ 10ns
  • Nominal Discharge Current In (L-N), (L-PE): No discharge, ≤ 10ns
  • Impulse Operating Voltage at 15kV 10 ns (L-N): 275 V
  • Response Time (L-L), (L-N), (L-PE): ≤ 10ns
  • Maximum Fuse Requirement for Branch and K-Type: 1000 A (gL/gG)
  • Effective IP Short Circuit Resistance with Maximum Fuse: 1000 kA
  • Number of Poles: 4 (3 phase + neutral)
  • Ground Connection: Yes
  • Input Connection: Screw Terminals
  • Output Connection: None
  • Screw Thread, Torque: M5, 4.5Nm
  • Multi-core and Single-core Conductor Cross-section: 2.5 mm2 - 4 mm2
  • Standards/Regulations: IEC 61643-11 2011, IEC 61643-11 2012
  • Protection Class: IP20
  • Enclosure Material: White ABS, UL’94 V-0 Flame Retardant
  • Clearance and Creepage Distance Standards: DIN VDE 0110-1, IEC 60664-1
  • Overvoltage Protection Fault Message: 3 LEDs
  • Direction of Movement: 3L – N – PE
  • Mounting Type, Design: DIN Rail 35mm, Rail Module
  • Operating Temperature: -50 °C, +80 °C
  • Dimensions: 50 x 75 x 60mm

GNDSeries
Neutral-Earth Regulator

The GNDSeries is a model of the Trimbox brand and its function is to regulate the potential difference between neutral and earth to avoid damaging sensitive electronic devices and electronic cards. It also prevents image disturbances on the screens of monitors (including projections), which are generally considered as interferences, caused by ground.